Alltec Envirosafe Multi Surface (1 x 5L)

£21.89

Availability: In stock (can be backordered)

ENVIROSAFE – virus & bacteria control

A multi-surface cleaner and sanitiser that will safely clean and protect by removing harmful bacteria, viruses and odours.
Suitable for all wet cleanable surfaces.

NON-HAZARDOUS IN DILUTION
BIODEGRADABLE
ALCOHOL AND BLEACH FREE
NON-FLAMMABLE
NEUTRAL PH
SUITABLE FOR BIO-HAZARD CONTROL FOGGING

PASSED & APPROVED TO EUROPEAN STANDARDS
ANTI-BACTERIAL EN1276 LOG KILL 6 = 99.9999%
ANTI-VIRAL EN14476 LOG KILL 4.33 = 99.99%
ANTI-FUNGAL EN1650 LOG KILL 6 = 99.9999%

SUITABLE FOR USE IN HOMES • DOCTORS’ SURGERIES • CARE HOMES • SCHOOLS • OFFICE BUILDINGS • ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL

FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS

However, allowing to dwell, especially on fabrics & fibres ensures product is absorbed and fully effective (do not over wet.)

LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE
The antimicrobial effects of Envirosafe can last weeks, however in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.

FOOD SAFETY

Standard Envirosafe is not food safe – our NEW Envirosafe SF is fragrance free and ready to use, therefore safer for food and for use in food prep areas, however (again more real world advice) European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied – therefore we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared. (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the foreseeable future!)

INSTRUCTIONS FOR USE:

Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.

For all uses dilute 10:1 (100ml per 1L) Mix into fresh, clean water. Allowing product to dry after application ensures a protective residual layer. Once mixed it will last for months if free from cross contamination and kept from extremes of temperature and sunlight

Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.

Unit Size 5L

Case Quantity 1 x 5L

 

 

Reviews

There are no reviews yet.

Be the first to review “Alltec Envirosafe Multi Surface (1 x 5L)”

Your email address will not be published. Required fields are marked *

You may also like…